Small size glass tile are best cut with specialty glass mosaic tile cutters and larger sizes such as 2x2 are best cut with a wet saw. Use a high quality wet saw with a diamond cut-off or carbide blade designed for cutting glass tiles.Make sure that glass tile is installed over the proper substrate. This is one of the most important factors in ensuring a good installation.
Make sure that the surface you are tiling is a clean, sound surface and free of dirt, oils, including curing compounds, and sealers. Substrate should be free of cracks and if in water should be waterproof. If necessary, use the installation material manufacturers membrane for cracks and water protection. Particular care should be taken to use the correct adhesive, grout and sealants.Using the wrong setting material can cause damage to the color and beauty of glass mosaic. The installer is responsible for choosing and using the correct installation practices to achieve an acceptable finished product. Is in no way responsible for the damages caused to glass mosaic by using the wrong setting material or grout.
We recommend using a white thin-set mortar or setting material to keep color consistent with the samples. All installation materials should be used according to the manufacturers instructions.Grout joints should be packed full and free of all voids and pits. Excess grout should be cleaned from the surface as the work progresses, while grout is fresh and before it hardens. Prior to grouting, test in a small area to make sure the surface does not scratch during grouting. Grouting may be done after tile is firmly set approximately 24 hours after installation. Clean the surface with a clean, damp sponge. Allow grout to set firm or until haze forms on the tile and the grout in the joints sets firm. Use a soft, clean, dry cloth to polish off haze and remaining grout residue. Final cleaning of grout haze and tile polishing should be done with clean, dry cheesecloth within 24 hours of grouting. Maintenance Glass mosaic is durable and stain resistant, but care should be taken to maintain its lasting beauty. To maximize the life of your mosaic and retain its artistic integrity, please consider the following.
Use only a mild, pH-neutral detergent cleaner and damp sponge or rag to clean your mosaic. Do not use acid, alkaline, and solvent-based cleaners. They can damage and/or discolor the tiles and the grout.
Do not wax any part of your mosaic. Do not let stains sit on your mosaics surface for extended periods.However, some rural areas, inaccessible roads or limited access for semi-truck deep hill, gravel road, long driveway, narrow road, private road, etc. Please note that this is a very large and heavy item! (See specifications above) You MUST be able to make arrangements to get this into your home. We cannot replace a part if damage is caused by the. Any unpaid items may be re-listed for other buyers at any time without prior notice.
You MUST be verified and have a confirmed address. We make sure the customer is 100% pleased. IF YOUR ITEM ARRIVES BROKEN PLEASE FOLLOW INSTRUCTIONS BELOW. Simply write items arrived damaged.
Even with all of the extra measures we take to ensure a safe and complete transit , nonetheless, damages or shortage may still occur. In case such an event should occur, in order for us to replace any item(s) free of charge or issue a credit.
After the driver leaves, please open and inspect all items and report to us if there are any problems on the item(s) immediately. Write "refused due to damage".
Within 3 DAYS of the receipt of your order. What is your return/cancellation policy? Our showroom is located in Brooklyn.
The item "12 x 12 FJI0359F RED GLASS MOSAIC TILE SET OF 5 PCS" is in sale since Thursday, September 29, 2016. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Flooring & Tiles\Floor & Wall Tiles". The seller is "kitchen-bath-designers" and is located in Brooklyn, New York. This item can be shipped worldwide.